Dynamic evaluation method for full cycle of oil testing: A case study of Well Ma X in Mazhongblock, Junggar Basin

Authors

  • Wenquan Z Well Testing Company of XDEC, Xinjiang, Karamay, 834000, China; Exploration Division of Xinjiang Oilfield Company, Xinjiang, Karamay, 834000, China

Keywords:

build-up test, conductivity

Abstract

For purpose of rapidly evaluating the fracturing effect and predicting the post-frac productivity, a dynamic evaluation method for the full cycle of oil testing based on the data of plugging breaking and fracturing pressure drop after perforation was proposed for the first time. Considering the characteristics of short oil testing drainage time, rapid system change, oil-gas-water multiphase flow, and unsteady flow, through the analysis of production data, the transient production analysis of flowback after fracturing was realized, and the conductivity of induced fractures was accurately characterized. Combined with the comprehensive analysis of shut-in pressure data, a dynamic evaluation method for the full cycle of oil testing was finally developed by integrating interpretations of fracturing pump shutdown pressure drop, production data analysis, and build-up testing. This method was applied to Well Ma X in the Mazhong block of the Junggar Basin, providing reasonable explanations for reservoir fluid supply capacity, boundary range, fracture development, and matrix properties, effectively supporting reservoir reserve declaration and production capacity construction. © 2023 Well Testing. All rights reserved.

References

LU Jianlin, LI Guoqiang, LI Chaoyong, Et al., An early well test interpretation method for low permeability reservoir, Petroleum Exploration and Development, 26, 2, pp. 86-89, (1999); 49, 2, (2000); ZHANG Qi, Macro-scale flow simulation and productivity analysis in shale oil and gas reservoirs, (2018); FU Yong, The remaining oil distribution study of fluvial facies sandstone reservoir in Yangerzhuang Oilfield,Dagang, (2018); SUN Ke, LIU Huiqing, WANG Teng, Et al., A novel method for predicting recoverable reserves of single well through depletion-drive development after fracturing in tight oil reservoirs, Acta Petrolei Sinica, 41, 10, pp. 1238-1247, (2020); ZHANG Yuejuan, Study of the coupling model between fracture and multi-fractured horizontalwells of shale gas, (2017); JIA Haomou, JIAO Ying, LI Chenliang, Study on fracture seepage characteristics based on a dual medium model, Technology Wind, 5, pp. 139-140, (2012); TONG Dengke, GE Jiali, An exact solution for unsteady seepage flow through fractal reservoir, Chinese Journal of Theoretical and Applied, 30, 5, pp. 621-626, (1998); TAO Jun, Research on fractal seepage model of shale gas, (2015); HAN Fengrui, LIN Jiaen, CHAO Chong, Et al., The method for the data processing of short-term well-testing and its application, Journal of Chongqing University of Science and Technology (Natural Sciences Edition), 6, 4, pp. 23-25, (2004); CHEN Jun, XU Guangpeng, FAN Huaicai, Et al., Research on a compound production decli nemodel, Natural Gas Exploration and Development, 31, 3, pp. 39-41, (2008); ZHAO Haiyang, JIA Yonglu, WANG Dongquan, Study of production decline model for dual porosity-homogeneous composite reservoir [ J ], Xinjiang Petroleum Geology, 31, 1, pp. 63-65, (2010); ZHANG Tongze, Semi-analytical seepage model analysis of volume fracturing horizontal wells in tight reservoirs, Yunnan Chemical Technology, 48, 2, pp. 120-122, (2021); WEN Jiexiong, TIAN Wei, BI Quanfu, Et al., A new data inversion analysis method based on dig ital filtered pump-stop data of hydraulic fracturing [ J ], Journal of University of Science and Technology of China, 48, 5, pp. 392-399, (2018); GUO Wei, ZHANG Bo, LI Jianxun, Et al., New method for determination of formation permeability, reservoir pressure and fracture properties from a minifrac test, Liaoning Chemical Industry, 43, 2, pp. 210-212, (2014); CHEN Yuanqian, Derivation of the pseudo-steady-state stage relationship of pressure drawdown curve and its judging methods, Xinjiang Petroleum Geology, 12, 2, pp. 150-159, (1991)

Published

30-03-2023

How to Cite

Wenquan, Z. (2023). Dynamic evaluation method for full cycle of oil testing: A case study of Well Ma X in Mazhongblock, Junggar Basin. Well Testing Journal, 32(1), 20–24. Retrieved from https://welltestingjournal.com/index.php/WT/article/view/50

Issue

Section

Research Articles

Similar Articles

<< < 1 2 3 4 > >> 

You may also start an advanced similarity search for this article.